Frequently Asked Questions
How much does epoxy garage floor coating cost in Aurora?
Epoxy garage floor coating in the area runs from $6 to $12 per square foot. It depends on the system type. Flake is at the lower end. Metallic costs more. Total price also depends on slab condition. Cracks, moisture, and old coatings all add prep work. Get a written quote based on your specific garage floor.
What is the best garage floor coating for York Region winters?
Flake epoxy with a polyaspartic topcoat handles road salt, tire traffic, and temperature swings across the seasons. It is the most popular system for local garages. Metallic suits homeowners wanting a premium look. The right system depends on your garage use, slab condition, and how much salt and moisture the floor is exposed to.
Can you coat an older garage floor in the area?
Yes, after proper testing and surface prep. Heritage homes near Wellington Street and the Yonge corridor often have garage slabs with decades of old paint, sealers, or adhesive beneath the surface. Diamond grinding must remove all of it. A blocking primer goes down first when testing shows high moisture from the clay soil beneath.
How long does garage floor coating take in Aurora?
Most residential garage floor projects take one to two days. Full chemical cure takes seven days. Light foot traffic is possible within 24 hours. Vehicles must stay off the coated surface for at least 72 hours after the final topcoat is applied.
Why do Aurora garage floors crack so much?
Aurora sits at a higher elevation on the northern slope of the Oak Ridges Moraine. That means colder temperatures and more freeze-thaw cycles than most of the GTA. Road salt tracked in from Highway 404 and Yonge Street eats into the concrete. Moisture from the East Holland River valley adds hydrostatic pressure from below. Proper surface prep and a vapor-blocking primer before coating prevent the damage that ruins most garage floors.
Is metallic epoxy a good choice for a garage in Aurora?
Yes. Metallic epoxy creates a seamless, stain-proof finish that looks like polished stone. It works well in garages that double as showrooms, workshops, or entertainment spaces. The surface resists tire marks, salt, and chemical spills. It does cost more than flake but delivers a premium look that holds up under real daily use.
Does the Oak Ridges Moraine affect garage floor concrete in Aurora?
Yes. Aurora rests on the northern slope of the moraine, where clay and silt soil hold moisture close to the surface. That moisture reaches garage slabs through hydrostatic pressure from below. Proper moisture testing and a vapor-blocking primer are essential before any coating goes down. Skipping this step leads to peeling and delamination within months.
What areas of Aurora does GLI Epoxy Flooring serve for garage floor coating?
We serve all neighborhoods, including Aurora Heights, Aurora Village, Regency Acres, and Hills of St. Andrew. Residential garages, commercial parking areas, and heritage garage slabs across every part of town fall within our range. Our shop connects to Aurora in about 30 minutes via Highway 404.